Installation and operation process of open pump

Category: Water pump knowledge

2024-05-30

Mid-open pump is a common centrifugal pump, which is characterized by simple structure, easy maintenance, stable operation and so on. Open pump is widely used in agriculture, industry, construction, municipal and other fields, used to transport water, sewage, oil and other media.

As a kind of pump used to transport all kinds of corrosive and viscous liquid, the pump has a wide range of applications in chemical, printing and dyeing, pharmaceutical, food and other industries. In operation, it should be carried out in strict accordance with the operating procedures, and pay attention to safe operation skills and maintenance measures to ensure the normal use of the equipment. In the open pump can choose different materials and structural forms according to the needs to adapt to different conveying requirements. Normally, the pump should be designed, manufactured and used in accordance with the relevant national standards.

Installation and Use of 1. Opening Pump

The installation of the open pump is an essential step before use. When installing the middle pump, you need to pay attention to the following points:

The installation site should be flat, dry, well-ventilated, and close to the water source to facilitate the connection of the pipeline.

2. When installing, ensure that the pump body is level, and use a level to detect it, so as not to cause unstable operation due to uneven pump body.

3. Before installation, check the pump body and pipeline for debris, sediment and other substances, so as not to affect the normal operation of the pump.

4. When installing, the appropriate pipeline should be selected according to the inlet and outlet of the pump, and the pipeline connection should be firm and watertight.

5. After the installation is completed, the pump should be tested to ensure that the pump is running normally without abnormal sound and water leakage.

2. operation process

The operation process of the middle pump mainly includes the following steps:

1. Comb the equipment and ensure that the safety protection devices are intact;

2. Coil interface connection, start the vacuum pump and make it run normally;

3. Adjust the pump speed and flow, and gradually open the pump valve to fill the pump body with liquid;

After confirming that the pump body is full of liquid, the flow rate of the pump can be gradually increased until the required output flow rate is reached.

3. maintenance measures

1. Regularly check the running status of the pump to ensure the normal operation of the equipment;

2. Regularly check the pump body, seals, valves and other components of the loose, wear, and timely maintenance;

3. Clean the pipeline, valve, pump body and impeller and other components to ensure the health and safety of the equipment;

4. Replace the rubber seals regularly to ensure the sealing performance of the pump.

4. safety operation skills

1. In the operation, it should be carried out in strict accordance with the operating procedures, and the prescribed operating procedures must not be ignored or changed;

2. Before operation, check whether the equipment is intact and ensure that the safety protection devices are complete;

3. During the operation, pay close attention to the working state and pressure changes of the pump to ensure the normal operation of the pump;

4. After the operation, the pump valve should be closed in time, the operation of the pump should be stopped, and the equipment should be cleaned, disinfected and maintained.

5. Scope of Use

Open pump has the advantages of conveying a variety of corrosive, viscous liquid, therefore, its use is very wide. Common use occasions include chemical, printing and dyeing, pharmaceutical, food, pulp and paper and other industries, in these industries, the open pump can be used for a variety of raw materials, intermediate products and finished products of vacuum conveying, pressure conveying and slurry conveying.

Previous: Causes and Solutions of Vibration of Double Suction Pumps

Next: Starting and stopping of centrifugal pump is the necessary process of pump

Contact Us

Free Hotline:+86 18142662779

Fixed telephone:+86 19313001794      

Mobile:+86 18142662779(WeChat/WhatsAPP)

E-mail:info@sanchangpump.net