What to do when a high-flow, high-head multistage pump fails to draw water

Category: Water pump knowledge

2025-06-18

The problem of a high-flow, high-head multistage pump not drawing water may be caused by a variety of reasons, including power supply, installation, sealing, direction, liquid properties, and suction pipes. When troubleshooting, these aspects should be checked one by one to find the problem and take corresponding measures to solve it. If you cannot solve it yourself, you can seek professional help. In addition, daily maintenance is also the key to ensuring the normal operation of the pump. For the problem of a high-flow, high-head multistage pump not drawing water, we can check and solve it from the following aspects.

I. Check the power supply and motor

Ensure that the pump's power connection is normal and the motor runs smoothly. If the power supply is unstable or the motor malfunctions, it may cause the pump to malfunction and fail to draw water.

II. Check the pump installation

1. Ensure that the multistage pump is installed correctly, the inlet and outlet pipes are firmly connected, and there is no leakage or blockage.

2. Check whether the installation height of the pump meets the requirements. Excessive height may prevent the pump from drawing water.

III. Check the pump's sealing

The sealing performance of the multistage pump has a great impact on the water intake effect. Check the pump's sealing rings, packing glands, and other components to ensure that there is no damage or wear. If there is damage, it should be replaced in time.

IV. Check the pump's direction of rotation

Ensure that the pump's direction of rotation is correct. If the direction of rotation is incorrect, it may cause the pump to malfunction. A tool can be used to check the direction of rotation of the motor to ensure that it is consistent with the pump's requirements.

V. Check the liquid properties and suction pipe

1. Ensure that the liquid being sucked meets the pump's usage requirements and that there are no particles or impurities blocking the inlet pipe.

2. Check the length and diameter of the suction pipe to ensure that they meet the pump's flow rate and head requirements. If the pipe is too long or the diameter is too small, it may prevent the pump from drawing enough liquid.

3. Check the suction pipe for leaks. If there are leaks, they should be dealt with promptly.

VI. Adjust the pump's operating parameters

Adjust the pump's operating parameters, such as flow rate and pressure, according to actual needs. Improper parameter settings may cause the pump to malfunction.

VII. Seek professional help

If the above methods fail to solve the problem, it is recommended to contact professional maintenance personnel for repair. They have more experience and expertise and can more accurately identify and solve the problem.

VIII. Daily maintenance

To ensure the normal operation of the pump, regular maintenance should be carried out to check the wear and tear of each component and replace damaged components in time. At the same time, keep the pump clean to prevent impurities from entering the pump and affecting its performance.

Previous: Reasons why the head of a high-flow, high-head multistage pump cannot reach the target

Next: What to do when the speed of a high-flow, high-head multistage pump is unstable

Contact Us

Free Hotline:+86 18142662779

Fixed telephone:+86 19313001794      

Mobile:+86 18142662779(WeChat/WhatsAPP)

E-mail:info@sanchangpump.net