Reasons for impurities in the packing gland of a high corrosion and wear resistant multistage pump

2025-05-09

Regarding the causes of impurities in the packing of highly corrosion-resistant and wear-resistant multi-stage pumps, this is a rather complex issue involving multiple factors. A detailed analysis of this problem is provided below.

1. Impure raw materials or media: This is a major cause of impurities in the packing. During production, if the raw materials or media used contain impurities, these impurities may enter the packing section of the multi-stage pump with the liquid, adhering to the packing surface or clogging between the packing.

2. Improper packing selection: Different media require different types of packing. If the packing material is not properly selected, it may not be suitable for the specific media environment, leading to packing deterioration and the generation of impurities.

3. Poor sealing: Poor sealing performance of the multi-stage pump may also cause impurities to enter the packing area. If the sealing rings are severely worn or improperly installed, external contaminants can easily enter the pump.

4. Operational environment issues: If the working environment of the multi-stage pump contains a large amount of dust or other contaminants, these contaminants may also enter the packing area through the pump's vents or other channels.

5. Improper operation and maintenance: Inadequate maintenance by operators may also be a contributing factor. If the pump is not regularly cleaned and inspected, accumulated impurities may gradually enter the packing area. In addition, if the packing of a pump that has been running for a long time is not replaced regularly, impurities may also appear between the packing.

To address these issues, the following measures can be taken to reduce impurities in the packing:

1. Improve the purity of raw materials or media to ensure that only clean liquid enters the multi-stage pump.

2. Select the appropriate packing material according to the characteristics of the medium to ensure that the packing can adapt to the working environment.

3. Enhance sealing performance, regularly inspect and replace worn sealing rings.

4. Improve the operating environment to reduce the intrusion of contaminants from the environment into the pump.

5. Strengthen operation and maintenance management, regularly clean and inspect the multi-stage pump, and promptly replace worn packing.

In summary, the causes of impurities in the packing of highly corrosion-resistant and wear-resistant multi-stage pumps are multifaceted and require comprehensive consideration and appropriate measures for prevention and resolution.

Previous: What to do when a high corrosion and wear resistant multistage pump has difficulty starting?

Next: Reasons for foreign objects in the discharge water of a high corrosion and wear resistant multistage pump