Removal and installation steps of positive displacement pump

Category: Water pump knowledge

2024-08-16

Disassembly and installation of positive displacement pumps require certain professional knowledge and experience. When operating, be sure to follow the correct procedures and precautions to ensure safety and pump performance. If you are not familiar with the operation, it is recommended to seek professional help. Through correct disassembly and installation, the normal operation of the pump can be ensured and its service life can be extended.

1. removal steps

1. Preparation: Ensure that the working environment is clean and tidy, and prepare necessary tools, such as wrenches, screwdrivers, hammers, etc. Make sure the power supply is disconnected to avoid the risk of damage to electrical components or electric shock.

2. Disassemble external accessories: such as inlet and outlet pipes, pressure gauges, thermometers, etc.

3. Disassemble the pump head: According to the specific structure of the pump, use tools to loosen the connection between the pump head and the pump body, and gently remove the pump head.

4. Remove the bearing and bearing cover: use suitable tools to loosen the bearing and bearing cover, and remove the bearing and bearing cover.

5. Disassemble the rotor and stator and other internal components: According to the type and structure of the pump, gradually remove the internal rotor and stator and other key components.

6. Inspection and records: During the disassembly process, check the wear and damage of each component and record it for maintenance or replacement.

2. installation steps

1. Preparation: Make sure all parts are clean and checked in good condition, and confirm that all parts conform to the drawings.

2. Install the basic components: install the bearing and bearing cover, ensure that the bearing is installed correctly and fastened.

3. Install the pump head: Install the pump head on the pump body to ensure a good seal and no leakage.

4. Install internal components: Install internal components such as rotor and stator in the reverse order of disassembly to ensure correct position.

5. Install external accessories: such as inlet and outlet pipes, pressure gauges, etc., to ensure that the connection is correct and tight.

6. Test operation: After the installation is completed, conduct a trial operation to check the working status and performance of the pump.

7. Commissioning and maintenance: According to the operating conditions, make necessary adjustments and maintenance to ensure the normal operation of the pump.

Precautions

1. In the process of disassembly and installation, ensure that all parts are clean and avoid impurities from entering the pump.

2. Use suitable tools to avoid damage to parts.

3. Follow the manufacturer's guidelines and recommendations to ensure proper removal and installation.

4. In the process of operation, pay attention to personal safety and avoid injury.

Previous: Fault of positive displacement pump and its solution

Next: How to repair and maintain the positive displacement pump

Contact Us

Free Hotline:+86 18142662779

Fixed telephone:+86 19313001794      

Mobile:+86 18142662779(WeChat/WhatsAPP)

E-mail:info@sanchangpump.net