What are the advantages of petrochemical multistage pump, petrochemical pump which is good?

Category: Water pump knowledge

2024-06-25

Petrochemical multi-stage pumpWhat are the advantages, this is a matter of concern. As an important industrial equipment, petrochemical multi-stage pump plays an important role in the petrochemical industry. It has several advantages and provides stable and reliable support for industrial production.

1. Petrochemical multi-stage pump has the characteristics of high efficiency.In the process of petrochemical production, the transportation of fluid is an important task. The multi-stage pump, with its high efficiency, can deliver the fluid to the target site at a higher speed and a larger flow rate. This is one of the key factors for petrochemical enterprises to improve production efficiency and reduce production costs.

2. Petrochemical multi-stage pump has good corrosion resistance.In the petrochemical industry, the treated medium is often highly corrosive. In order to ensure the long-term stable operation of the equipment, the multi-stage pump uses corrosion-resistant materials to resist the corrosive effect of the medium. This greatly increases the service life of the pump, reduces the frequency of equipment maintenance and replacement, and reduces the operating cost of the enterprise.

3. Petrochemical multi-stage pump with high lift and pressure.In petrochemical production, it is often necessary to transport fluids from one location to another higher location, or to overcome certain resistance to complete the task of transporting fluids. The design of the multi-stage pump enables it to provide higher head and pressure to meet these special needs. This allows petrochemical companies to be more flexible in production layout and improve production efficiency.

4. The structure of petrochemical multi-stage pump is compact and easy to install.The structural design of the pump is reasonable, the occupied space is small, and it is convenient to install on the production site. This is particularly important for petrochemical companies. It reduces the footprint of the equipment, makes the site layout more compact, and improves production efficiency.

Petrochemical pump which is good

Hunan Sanchang Pump IndustryDY type multistage oil pumpThe horizontal, single-suction multi-stage, segmented structure has the advantages of high efficiency, low operating noise, good cavitation resistance, reasonable structure and long service life. Can transport hot water, oil, corrosive and abrasive media. It is used to transport petroleum and petroleum products containing no solid particles with a viscosity of less than 120 centistokes. Product implementation of JB/T1051-93 "multistage centrifugal pump type and basic parameters" standard. DY-type multi-stage oil pump This series of pumps is a horizontal single-suction multi-stage segmented centrifugal pump, which adopts the hydraulic model of high-efficiency and energy-saving products recommend used by the state, and is in a leading position in technology in the industry. It has the advantages of high efficiency, wide performance range, safe and stable operation, low noise, long life: easy installation and maintenance.

DYP self-balancing multistage oil pumpIt is used to transport oils and petroleum products that do not contain solid particles, the temperature is lower than 80 ℃, and the viscosity is less than 120mm. DYP self-balancing multi-stage oil pump materials are HT200, OT600, 304, 304L, 316L, 317L, 904L, CD4, etc.

AY type oil pumpThe series is improved and redesigned on the basis of the original Y-type oil pump series. It is to meet the needs of modernization, as soon as possible to adapt to the energy-saving as the center of the equipment replacement and development of products.

IY single-stage single-suction oil delivery centrifugal pumpIt is suitable for conveying non-corrosive and petroleum products without solid particles and viscosity less than 120 centistokes. It is also used to transport clean water or other liquids with physical and chemical properties similar to clean water, the temperature is not higher than 80 ℃, and the inlet pressure is not higher than 0.6MPa.

CZ series standard chemical pumpIt is a horizontal, single-stage and single-suction centrifugal pump. Its size and performance meet DIN24256/ISO2858 standards. The performance range of CZ series standard chemical pumps includes all the performances of IH series standard excellent pumps. Its efficiency, cavitation performance and other indexes exceed IH type pumps and can be interchanged with IH type pumps.

IH type single-stage single-suction cantilever chemical centrifugal pumpIt is an energy-saving and replacement product to replace the F-type corrosion-resistant centrifugal water pump. The product is widely used in chemical, petroleum, metallurgy, papermaking, food, pharmaceutical, synthetic fiber and other industrial sectors to transport corrosive or non-polluting viscosity similar to Water liquid. The inlet pressure of the pump shall not exceed 0.3MPa.

IJ Single-stage Single-suction Cantilever Chemical Centrifugal PumpIt is a new product optimized for design on the basis of IH series pumps, referring to foreign technologies and combining with actual use by users. Its rated performance and installation size meet ISO2858 standards, which are equivalent to ISO2858-1975. Its manufacturing technical conditions meet ISO5199 standards. It is mainly applicable to the transportation of slurry with solid content less than 50% and medium containing crystalline impurities in chemical processes. It is of the same type as IH type popularized by the state.

ZA chemical process centrifugal pumpProducts designed and manufactured according to API 610 and VDMA24297 (light/medium) specifications. Can transport a variety of temperature and concentration of sulfuric acid, nitric acid, hydrochloric acid and phosphoric acid and other inorganic acid and organic acid solution; a variety of temperature and concentration of sodium hydroxide and sodium carbonate and other alkaline solution; a variety of salt solution; a variety of liquid petrochemical products, organic compounds and other corrosive liquid.

ZE type petrochemical process pumpDesigned according to API 610, API 682 and VDMA24297 (heavy duty) specifications. The pump is a single-stage single-suction cantilever volute pump, and the pump body is supported by the center line. Axial suction, radial discharge. The axial force is hydraulically balanced by the front and rear mouth rings and balance holes. The mechanical seal can adopt single-end or double-end balanced container type. The mechanical seal is equipped with cooling, flushing or sealing fluid system, and the sealing pipeline system is designed according to API specifications. The maximum working pressure is 5.0MPa. Suction and discharge flanges can be designed according to GB, DIN and ANSI standards.

In summary, the petrochemical multi-stage pump has the advantages of high efficiency, good corrosion resistance, high head and pressure, compact structure and convenient installation. These advantages make multi-stage pumps widely used in the petrochemical industry and provide strong support for the sustainable development of enterprises.

Previous: What are the uses and scenarios of petrochemical multi-stage pumps?

Next: What are the selection factors of petrochemical multi-stage pump

Contact Us

Free Hotline:+86 18142662779

Fixed telephone:+86 19313001794      

Mobile:+86 18142662779(WeChat/WhatsAPP)

E-mail:info@sanchangpump.net