Horizontal multistage centrifugal pump head is insufficient why?

Category: Water pump knowledge

2024-05-08

Unreasonable selection of pump design, impeller wear or blockage, improper design of inlet pipeline, poor flushing system and driving equipment problems may lead to insufficient lift of horizontal multistage pump. In order to solve these problems, it is necessary to carry out reasonable pump selection, regular inspection and maintenance, optimize pipeline design and ensure the normal operation of the drive equipment. Only by comprehensively analyzing and solving these problems can we ensure the normal operation of the horizontal multistage pump and improve its head performance.

卧式多级离心泵扬程不足的是为什么?

There may be a variety of reasons for the lack of multi-stage pump head, the following are some common reasons:

1. The impeller is worn or blocked:The impeller of the multistage pump may be worn or blocked during operation. Wear will cause the impeller geometry to change, thus affecting the head; blockage will hinder the flow of liquid, so that the pump can not provide enough head. Regular inspection and cleaning of the impeller and timely replacement of worn parts can effectively avoid these problems.

2. The pump design is unreasonable:Multi-stage pump design parameters include impeller diameter, impeller number, blade angle, these parameters directly affect the pump head. If the design of the pump is unreasonable, such as the impeller size is too small or the blade angle is incorrect, it will lead to insufficient head. In the design and selection stage, it is necessary to calculate and select accurate parameters according to actual needs.

3. Large resistance of inlet pipeline:The resistance of the inlet pipe has an important influence on the head of the pump. If the design of the inlet pipe is unreasonable or there are problems such as blockage, bending, and excessive length, it will increase the resistance and reduce the head of the pump. Therefore, during installation and operation, attention should be paid to optimizing the design of the inlet pipeline and keeping the pipeline unblocked.

4. The speed of the pump does not match:The head of the multi-stage pump is related to the speed. If the speed of the pump does not match the design parameters, it will also lead to insufficient head. When using a multi-stage pump, it is necessary to ensure that the speed of the pump is in line with the design requirements and adjust it as needed.

5. Pump drive equipment problems:For example, insufficient motor power, transmission damage, etc. will reduce the pump head.

Previous: Horizontal multistage pump shell crack how to deal?

Next: The use of universal meters and megohmmeters for water pump maintenance

Contact Us

Free Hotline:+86 18142662779

Fixed telephone:+86 19313001794      

Mobile:+86 18142662779(WeChat/WhatsAPP)

E-mail:info@sanchangpump.net