Horizontal multistage centrifugal pump daily maintenance

Category: Water pump knowledge

2024-04-24

Horizontal multistage centrifugal pump as a commonly used industrial equipment, daily maintenance is very important, only regular maintenance and maintenance, in order to ensure the normal operation of the pump, extend its service life.

卧式多级离心泵日常保养

First of all, the pump body and pipes should be cleaned regularly to remove the accumulated dirt and impurities. Can use cleaning agent and water for thorough cleaning, keep the inside of the pump body clean.

Second, check the sealing performance of the pump to ensure that there is no water leakage. You can judge whether the sealing is good by observing whether there is water around the pump body. If there is any problem, the seal should be replaced in time.

In addition, regularly check the bearings and lubricating oil of the pump to ensure its normal operation. The bearings should be kept in good lubrication condition, and the lubricating oil can be replaced and refueled according to the user manual or manufacturer's recommendations. In addition, attention should also be paid to check whether the motor and electrical connections of the pump are normal to avoid damage to the equipment due to circuit failure.

Finally, the pump is regularly tested to check whether its performance and flow are normal. Parameters can be adjusted and calibrated as needed.

Previous: How to check the method and steps of horizontal multistage centrifugal pump

Next: Installation method of horizontal multistage centrifugal pump

Contact Us

Free Hotline:+86 18142662779

Fixed telephone:+86 19313001794      

Mobile:+86 18142662779(WeChat/WhatsAPP)

E-mail:info@sanchangpump.net