Reasons for impurities in the packing space of a high-efficiency, energy-saving multi-stage pump

Category: Water pump knowledge

2025-07-16

High-efficiency energy-saving multi-stage pumps are widely used in industrial, agricultural, and municipal fluid transportation. While they offer superior performance and stable operation, impurities sometimes accumulate between the packing seals during use. This not only affects pump efficiency but also poses a potential threat to its lifespan. The following is an analysis of the causes of impurity accumulation between the packing seals of high-efficiency energy-saving multi-stage pumps.

I. Poor Operating Environment

In the pump's operating environment, if there is a large amount of dust or other particulate matter, these substances may enter the pump with the fluid and deposit at the packing seals. Therefore, maintaining a clean operating environment for the pump is an important way to prevent the accumulation of impurities between the packing seals.

II. Packing Seal Aging or Damage

During long-term operation, the packing seals may become damaged or deformed due to wear, corrosion, or aging. These irregularities can cause impurities in the fluid to accumulate between the seals. Regularly inspecting and replacing severely worn packing seals can effectively reduce impurity accumulation.

III. Poor Fluid Quality

Impurities in the fluid are one of the main reasons for impurity accumulation between the pump's packing seals. If the fluid is not adequately filtered or improperly treated, solid particles and suspended matter may enter the pump with the fluid and deposit at the packing seals. Therefore, ensuring fluid quality is key to preventing impurity accumulation between the packing seals.

IV. Improper Installation

During installation, if the operation does not follow specifications, it may lead to excessive or insufficient gaps between the packing seals and other pump components. This not only affects pump performance but can also allow impurities to easily enter and accumulate between the packing seals. Correct installation and commissioning are important steps to ensure the pump's normal operation.

V. Inadequate Maintenance

Regular maintenance and inspection of the pump are crucial for ensuring its normal operation. Inadequate maintenance may lead to incomplete cleaning, allowing impurities to accumulate between the packing seals. Therefore, strengthening pump maintenance, regularly cleaning and inspecting the pump's components, is an effective measure to prevent impurity accumulation between the packing seals.

In summary, the main causes of impurity accumulation between the packing seals of high-efficiency energy-saving multi-stage pumps include poor operating environment, packing seal aging or damage, poor fluid quality, improper installation, and inadequate maintenance. By taking appropriate preventive measures and solutions for these problems, impurity accumulation between the packing seals can be effectively reduced, ensuring normal pump operation and extending its service life.

Previous: What to do when a high-efficiency, energy-saving multi-stage pump has difficulty starting?

Next: What to do when the water pressure of a high-efficiency, energy-saving multi-stage pump is unstable

Contact Us

Free Hotline:0086-13307481676

Fixed telephone:0086-13307481676      

Mobile:0086-13307481676(WeChat)

E-mail:sales@sanchangpump.com