Reasons for interruption of high corrosion-resistant and wear-resistant multi-stage pump water extraction

Category: Water pump knowledge

2025-05-13

High-corrosion-resistant, wear-resistant multi-stage pumps are widely used in water treatment, chemical, and metallurgical fields. They are favored by users for their high efficiency, stability, and durability. However, interruptions in pumping can sometimes occur during operation, affecting production efficiency and product quality. The following are some possible causes of interruptions in high-corrosion-resistant, wear-resistant multi-stage pump operation.

I. Pump Issues

1. Seal Wear: Seal wear in multi-stage pumps can cause internal leakage, affecting normal operation and causing pumping interruptions.

2. Impeller Wear: The impeller is a core component of the pump; wear will affect the pump's pumping capacity.

3. Pump Shaft Failure: Pump shaft bending, breakage, or bearing wear can prevent the pump from operating normally.

II. Piping Issues

1. Pipe Blockage: Impurities and sediment in the pipes can cause blockages, preventing smooth water flow.

2. Pipe Leakage: Loose or damaged pipe connections can cause leaks, affecting normal pump operation.

III. Water Source Issues

1. Water Level Drop: A low water level in the source can prevent the pump from drawing sufficient water, causing interruptions.

2. Water Quality Issues: A high concentration of impurities and particulates in the water can cause internal pump blockages or accelerated wear.

IV. Operation and Maintenance Issues

1. Improper Operation: Improper operation by personnel can lead to abnormal pump operation, such as excessively high or low speeds, or improper adjustment of inlet and outlet valves.

2. Insufficient Maintenance: Failure to regularly maintain the pump can lead to the accumulation of impurities and sediment, affecting normal operation.

In summary, interruptions in high-corrosion-resistant, wear-resistant multi-stage pump operation can stem from various factors, including pump issues, piping issues, water source issues, and operation and maintenance issues. During actual use, troubleshooting and remediation should be based on the specific situation. Regular maintenance is recommended to keep the equipment in good working order and extend its service life.

Previous: How to adjust the water pressure of a high corrosion and wear resistant multistage pump

Next: Why is the power consumption of a high corrosion-resistant and wear-resistant multi-stage pump so high?

Contact Us

Free Hotline:0086-13307481676

Fixed telephone:0086-13307481676      

Mobile:0086-13307481676(WeChat)

E-mail:sales@sanchangpump.com