How to adjust the concentricity of pumps in the mining industry

Category: Water pump knowledge

2025-04-14

Concentricity adjustment of pumps in the mining industry is a crucial step in ensuring proper equipment operation and extending service life. Concentricity refers to the coaxial accuracy between the pump shaft and the drive shaft. Adjusting concentricity ensures efficient pump operation and reduces energy consumption. Below are the basic steps and precautions for adjusting pump concentricity in the mining industry.

I. Steps

1. Preparation Stage: First, ensure a safe working environment, turn off the pump, and disconnect the power. Prepare the necessary tools, such as a dial indicator, ruler, and level.

2. Cleaning and Inspection: Clean the pump housing and bearings, and check the bearings and shafts for wear or damage.

3. Installation of Alignment Device: Use an alignment device (such as a laser alignment tool) to determine the position of the pump shaft and drive shaft.

4. Coupling Adjustment: According to the indications of the alignment device, adjust the position of the coupling so that it is concentric with the drive shaft.

5. Measurement with Dial Indicator: Install a dial indicator on the coupling to measure the radial and axial runout of the shaft to determine whether the concentricity meets the standard.

6. Fine Adjustment: Based on the dial indicator readings, make fine adjustments until the specified concentricity standard is reached.

7. Tightening and Testing: After ensuring that all components are tightened, restart the pump and perform a test run to check for any abnormal noise or vibration.

II. Precautions

1. Safety Issues: Before performing any adjustments, ensure a safe working environment and comply with relevant safety regulations and operating procedures.

2. Professional Operation: Concentricity adjustment requires professional personnel; do not attempt to adjust it yourself.

3. Accurate Measurement: Use precise measuring tools such as dial indicators to ensure the accuracy of the measurement results.

4. Fine Adjustment: Make fine adjustments during the adjustment process to avoid damaging the equipment.

5. Regular Inspection: It is recommended to regularly check and adjust the pump's concentricity to ensure normal equipment operation.

6. Maintenance: In addition to concentricity adjustment, regular maintenance of the pump is also necessary, such as changing lubricating oil and checking seals.

In summary, concentricity adjustment of pumps in the mining industry is an important maintenance task that requires professional personnel. Through proper adjustment methods and precautions, efficient pump operation and extended service life can be ensured.

Previous: What are the accessories for mining industry pumps?

Next: How to use a percentage gauge for pumps in the mining industry

Contact Us

Free Hotline:+86 18142662779

Fixed telephone:+86 19313001794      

Mobile:+86 18142662779(WeChat/WhatsAPP)

E-mail:info@sanchangpump.net