Guide to repair and maintenance of irrigation and drainage pumps

Category: Water pump knowledge

2024-07-31

irrigation and drainage pumprepair and maintenance is essential to ensure the normal operation of the pump. Through regular inspection, repair and maintenance, the service life of the pump can be extended and the efficiency of irrigation and drainage can be improved. I hope this guide can help you better maintain and use irrigation pumps to ensure the smooth progress of agricultural production.

The Importance of 1. Repair and Maintenance

Irrigation and drainage pump is an important equipment for agricultural irrigation and drainage, and its normal operation is very important for agricultural production. Regular repair and maintenance can ensure the stable operation of the irrigation pump, prolong the service life, and avoid the loss caused by sudden failure.

2. Common Troubleshooting

1. Insufficient flow: check whether the impeller is blocked, whether the speed is sufficient, whether the pipeline is leaking, etc.

2. Excessive noise: it may be bearing wear, impeller wear or foreign matter in the pump.

3. Motor overheating: check whether the voltage is stable and whether the motor load is too large.

3. maintenance steps

1. Disassembly: According to the structure of the pump, gradually disassemble the components.

2. Inspection: Check the wear of the impeller, bearing, seal ring and other parts.

3. Replacement: Replace the severely worn parts.

4. cleaning: cleaning pump internal and external dirt.

5. Assembly: Assemble the components in the reverse order of disassembly.

4. maintenance method

1. Regular inspection: check the operation of the pump at least once a month, including flow, noise, etc.

2. Lubrication: regularly add lubricating oil to bearings and other parts.

3. cleaning: keep the pump and the surrounding environment clean, avoid debris into the pump.

4. Storage: When not in use, the pump should be stored in a dry and ventilated place to avoid moisture.

5. Replacement of wearing parts: If the parts are found to be seriously worn, they should be replaced in time.

5. considerations

1. The power supply should be cut off before maintenance to ensure safety.

2. Use special tools for disassembly and assembly to avoid damage to parts.

3. When replacing parts, original parts should be selected to ensure quality.

4. In the process of maintenance, attention should be paid to safety to avoid accidents.

5. For problems that cannot be solved, professional maintenance personnel should be contacted in time to deal with them.

Previous: Removal and Installation of Irrigation Pump

Next: What are the uses and scenarios of irrigation pumps?

Contact Us

Free Hotline:+86 18142662779

Fixed telephone:+86 19313001794      

Mobile:+86 18142662779(WeChat/WhatsAPP)

E-mail:info@sanchangpump.net