Guide to repair and maintenance of multistage pumps in the water industry

Category: Water pump knowledge

2024-07-11

Water industry multistage pumpThe repair and maintenance involves many aspects, including daily maintenance, regular inspection, and treatment measures under certain circumstances. The following are some key steps and precautions:

1. Overview

In the water industry, multi-stage pumps play a vital role. In order to ensure its efficient and stable operation, repair and maintenance work is very important. The repair and maintenance of multi-stage pumps can not only extend their service life, but also reduce the probability of failure and ensure the normal operation of the water conservancy system.

2. maintenance steps

1. Regular inspection: Regularly check all parts of the multi-stage pump, including impellers, bearings, sealing rings, etc., and replace worn or damaged parts in time. Every day, check whether the running sound of the centrifugal pump is normal, whether there is vibration and leakage, and deal with the problems found in time. The centrifugal pump with packing seal should regularly check the leakage at the stuffing box. The normal leakage at the stuffing box should be 10-20 drops per minute. Otherwise, the packing gland tightness position should be adjusted.

2. Disassembly and cleaning: disassemble the pump body, clean the inside, remove impurities and scale, and ensure smooth operation.

3. Component testing: professional testing of key components such as bearings and seals to ensure good performance.

Repair damaged parts: repair or replace worn or damaged parts to ensure the performance of the multi-stage pump.

3. maintenance points

1. Lubrication: regularly add lubricating oil to bearings and other parts to ensure smooth operation. Inject an appropriate amount of bearing lubricating oil into the bearing body, and the oil level should be maintained at the center line of the oil mark to ensure that the lubricating oil is replaced or supplemented in time.
2. Sealing: Check the sealing device to ensure that it is intact without leakage and prevent moisture from entering the pump.

3. Fasteners: Check the fastening of fasteners to prevent loosening from affecting operation. Check the pipes and joints of the multi-stage pump to ensure that there is no looseness, and try to turn the pump body manually to verify its flexibility.
4. Appearance: keep the appearance of the multi-stage pump clean and avoid impurities entering the pump.

5. Operating environment: Ensure that the multi-stage pump runs in a good environment and avoid running at too high or too low temperatures. In actual use, control the flow and head of the multi-stage pump to ensure that it runs within the scope indicated on the sign to achieve the best energy saving effect.

4. considerations

1. Ensure that the power supply is disconnected before maintenance to avoid electric shock accidents.

2. Make marks before disassembly to facilitate the restoration of the original position during installation.

3. Use professional tools for repair and maintenance to avoid damage to parts.

4. Pay attention to safety during repair and maintenance to avoid accidents.

5. Summary

The repair and maintenance of multi-stage pumps is a key link to ensure the normal operation of the water conservancy industry. Through regular inspection, disassembly and cleaning, component detection and repair, and correct maintenance methods, the efficient and stable operation of the multi-stage pump can be ensured. At the same time, the observance of precautions can also ensure the safety of the repair and maintenance process. It is recommended that relevant personnel in the water conservancy industry carry out the repair and maintenance of multi-stage pumps in strict accordance with this guide to ensure the normal operation of the water conservancy system.

Previous: Disassembly and installation steps of multi-stage pump in water conservancy industry

Next: What are the uses and scenarios of multi-stage pumps in the water conservancy industry?

Contact Us

Free Hotline:+86 18142662779

Fixed telephone:+86 19313001794      

Mobile:+86 18142662779(WeChat/WhatsAPP)

E-mail:info@sanchangpump.net