What to do when a high-efficiency, energy-saving multi-stage pump fails to draw water

Category: Water pump knowledge

2025-07-26

A high-efficiency, energy-saving multi-stage pump failing to draw water is a common problem that can affect various fields, including industry, agriculture, and daily life. When faced with this issue, we must first understand the potential causes and then find targeted solutions.

I. Possible Causes:

1. Inlet pipe leakage: This is a common reason for a multi-stage pump's failure to draw water. Check if the inlet pipe connections are tight and whether there is any damage or aging.

2. Bottom valve damage or blockage: The bottom valve is a crucial component for ensuring the pump draws water normally. If it is damaged or blocked, the pump will not be able to draw water.

3. Foreign objects inside the pump: Foreign objects entering the pump may block the water flow channel, causing the pump to malfunction.

4. Impeller damage or wear: The impeller is the core component of the pump. If it is severely damaged or worn, it will affect the pump's water pumping capacity.

II. Solutions:

1. Check and tighten inlet pipe connections: Ensure there are no leaks at the pipe connections. If there is damage or aging, replace them promptly.

2. Check the bottom valve: Remove the bottom valve for inspection. If damaged, replace it immediately. If blocked by impurities, clean it and reinstall it.

3. Clean foreign objects from inside the pump: If there are foreign objects inside the pump, stop the machine and clean them to ensure the pump is clean.

4. Check and replace the impeller: If the impeller is severely damaged or worn, replace it promptly to ensure the pump operates normally.

In addition, the following points should also be noted:

1. Ensure the power supply is normal: Check if the pump's power supply is stable. Abnormal power supply may cause the pump to malfunction.

2. Check the pump's installation location: Ensure the pump's installation location meets the design requirements. If the installation location is too high or too low, it may affect the pump's water suction capacity.

3. Regular inspection and maintenance: Regularly inspect and maintain the pump. If problems are found, address them promptly to prevent the failure from escalating.

In summary, when faced with the problem of a high-efficiency, energy-saving multi-stage pump failing to draw water, we should first determine the cause and then take appropriate corrective measures. During operation, pay attention to safety, ensure the power supply is stable, and regularly maintain and inspect the pump to extend its service life. If the problem is difficult to solve, seek professional help.

Previous: No more!

Next: What to do when the speed of a high-efficiency, energy-saving multi-stage pump is unstable

Contact Us

Free Hotline:0086-13307481676

Fixed telephone:0086-13307481676      

Mobile:0086-13307481676(WeChat)

E-mail:sales@sanchangpump.com