What to do when a high-efficiency, energy-saving multi-stage pump has difficulty starting?

2025-07-16

The difficulty in starting a high-efficiency, energy-saving multi-stage pump is the result of a combination of factors. To address this, we can approach the solution from several aspects.

I. Power Supply and Circuit Check

First, check if the power supply is stable and if the voltage meets the pump's requirements. Next, check if the circuit connections are good and if there is any looseness or short circuit. Circuit problems may prevent the pump from receiving the normal start signal, so this step is crucial.

II. Pump Problem Diagnosis

1. Check the impeller of the multi-stage pump to ensure it is not damaged or blocked. If there is a problem with the impeller, it will prevent the pump from pumping water normally, thus affecting the start.

2. Check the pump bearings to ensure they are well lubricated and not worn. Bearing problems may cause the pump to rotate poorly, affecting the start.

3. Check the pump's sealing to ensure there are no leaks. Leaks will not only affect the pump's performance but may also cause other problems.

III. Fluid Medium Issues

If the fluid medium temperature is too high or too low, or if the medium contains impurities, it may cause difficulties in starting the multi-stage pump. Therefore, it is necessary to check whether the medium meets the requirements and take appropriate measures.

IV. Control System Issues

If none of the above are problematic, there may be a problem with the control system. Check if the controller settings are correct and if there are any fault indications. If necessary, the controller can be debugged or replaced.

V. Operational Issues

Sometimes, improper operation may also cause difficulties in starting the multi-stage pump. Therefore, operators need to be familiar with the pump's performance and operational requirements to ensure that they operate according to the correct procedures.

VI. Seeking Professional Help

If the above methods fail to solve the problem, it is recommended to contact a professional maintenance team for inspection and repair. They have professional knowledge and experience and can quickly and accurately find the problem and provide effective solutions.

In summary, when faced with difficulties in starting a high-efficiency, energy-saving multi-stage pump, we need to start from the power supply, circuit, pump itself, fluid medium, control system, and operation, check them one by one, find the root cause of the problem, and then take corresponding measures to solve it. At the same time, it is also necessary to strengthen daily maintenance and upkeep to ensure the normal operation of the pump.

Previous: Reasons for Misalignment in High-Efficiency Energy-Saving Multistage Pump Couplings

Next: Reasons for impurities in the packing space of a high-efficiency, energy-saving multi-stage pump

RELATED INFORMATION

What happens when an MDP type mining wear-resistant self-balancing multi-stage pump is overloaded?

MDP-type mining wear-resistant self-balancing multi-stage pump is a high-efficiency and reliable industrial pump, widely used in mining, water treatment and other fields. When the load of this pump is too large, it may face a series of problems and challenges.

View Details

How to deal with water leakage from the pump cover of a high-efficiency energy-saving multi-stage pump

2025/07/17

Causes of damage to the flange of a high-efficiency, energy-saving multi-stage pump

2025/07/17