Reasons for interruption of high-flow, high-head multistage pump water extraction

Category: Water pump knowledge

2025-06-16

High-flow, high-head multistage pumps may experience interruptions during pumping, which is extremely detrimental to industrial production and water supply systems. The following analyzes the causes of such pumping interruptions.

1. Power Issues: Unstable power supply or power outages are direct causes of pump operation interruptions. This may be due to grid failures, cable damage, or problems with the pump's electrical system.

2. Pump Overload or Blockage: If the pump experiences excessive load or blockage during operation, it may trigger a self-protection mechanism, leading to operational interruption.

3. Mechanical Failure: The operation of multistage pumps relies on precise mechanical equipment, such as bearings and seals. Damage or wear to these components may lead to decreased pump performance and, in severe cases, pumping interruptions.

4. Changes in Liquid Properties: Changes in the properties of the transported liquid, such as increased viscosity or increased temperature, may reduce the pump's transport efficiency and, in severe cases, cause interruptions.

5. Control System Issues: The pumping process of multistage pumps requires a complex control system for monitoring and adjustment. If the control system malfunctions, such as sensor failure or regulator malfunction, it may lead to pump operation interruptions.

6. Improper Operation: Misoperation or improper maintenance by operators may also lead to interruptions in the operation of high-flow, high-head multistage pumps. For example, improper shutdown procedures or inappropriate start-up timing.

7. Environmental Factors: Extreme weather conditions, earthquakes, or other natural disasters may affect the normal operation of equipment, leading to pumping interruptions.

8. Equipment Aging: Equipment used for extended periods may experience component aging issues, affecting pump performance and stability.

To address this issue, a comprehensive inspection of the pump and system should be conducted to determine the specific cause of the interruption. Then, appropriate measures should be taken, such as repairing the electrical system, replacing damaged components, adjusting liquid properties, repairing or updating the control system, etc. In addition, strengthening operator training and ensuring regular maintenance and inspection of the equipment are also important measures to prevent pumping interruptions.

In summary, there are various reasons for interruptions in the pumping of high-flow, high-head multistage pumps, requiring investigation and resolution from multiple perspectives. Ensuring the normal operation of the equipment is crucial for the stability of industrial production and water supply systems.

Previous: How to adjust the water pressure of a high-flow, high-head multistage pump

Next: Why is the power consumption of a high-flow, high-head multistage pump so high?

Contact Us

Free Hotline:0086-13307481676

Fixed telephone:0086-13307481676      

Mobile:0086-13307481676(WeChat)

E-mail:sales@sanchangpump.com