PRODUCTS CENTER
croatia Double-suction Split-case Pump for Water Supply & Drainage
Product Description
This pump is suitable for media temperatures between -20℃ and 80℃. It mainly transports industrial water, domestic water and tap water. It is also widely applied in water conservancy projects, farmland irrigation and drainage.
I. Structural Features
This pump adopts a horizontal installation structure.Suction and discharge ports are arranged below the pump shaft centerline.The pump casing is horizontally split. Users can complete maintenance without removing inlet and outlet pipelines.
Bearings
Rolling bearings are installed at both ends to support the rotor.
Sliding bearings are optional for 24SA-18 and 16SA-90 models.
It supports two lubrication types: oil bath lubrication and grease lubrication.
Shaft Seal
1. Soft packing seal
2. Mechanical seal
II. Rotation Direction
Viewed from the motor end, the pump rotates counterclockwise. Clockwise rotation is available upon customer request.
III. Application
This single-stage double-suction split-case pump is widely applicable in factories, urban water supply systems, mines, power plants, farmland and water conservancy projects.
IV. Model Description
Example: 10SA-6A
- 10 —— Inlet diameter divided by 25 (i.e. inlet diameter: 250 mm)
- SA —— Single-stage double-suction clean water centrifugal pump
- 6 —— Rounded value of specific speed divided by 10
- A —— Modified outer diameter of impeller
Hunan Sanchang Pump Co., Ltd.
| Email: | info@sanchangpump.net |
| Hotline: | +86 181 4266 2779 |
| +86 193 1300 1794 | |
| Mobile/Wechat/WhatsApp: | +86 181 4266 2779 |
| Address: | No.517,Xiangfu Road, Yuhua |
| District, Changsha City | |
| Hunan Province, P.R.C |
