PRODUCTS CENTER
TTD ISG vertical single-stage pipeline centrifugal pump
Head range: H = 5~125m
Conveying temperature:-20-150 ℃ (please declare above 80 ℃)
Inlet pressure: 0-7.5MPa (above 0.3 MPa, please declare)
Sealing form: packing seal, mechanical seal
Water pump material: HT200, HT250, QT600, ZG, 304, 316, 316L, 317L, 904L, CD4-MCu, etc
Category:
Product Description
Product Description
ISG vertical pipeline centrifugal pump is an excellent hydraulic model selected by the scientific and technical personnel of this unit and the domestic pump experts, and the performance parameters of IS centrifugal pump are adopted, which are cleverly combined and designed on the basis of general vertical pump. At the same time, according to the use of temperature, media and other different in the ISG type based on the development of applicable hot water, high temperature, corrosive chemical pump, oil pump. This series of products have the advantages of high efficiency, energy saving, low noise and reliable performance.
In line with the latest national machinery department JB/T53058-93 standard requirements, products according to international ISO2858 standards design and manufacturing.
Overview
ISG type vertical management centrifugal pump is used for conveying clear water and other liquids with physical and chemical properties similar to clear water. it is suitable for industrial and urban water supply and drainage, pressurized water supply for high-rise buildings, garden sprinkler irrigation, fire fighting pressurization, long-distance transportation, heating, ventilation and refrigeration cycle, bathroom and other cold and warm water cycle pressurization and equipment matching. the operating temperature is t <80 ℃.
Structure Description
1. The pump is of vertical structure, with the same import and export caliber and located on the same center line. It can be installed in the pipeline like a valve. It has compact and beautiful appearance, small floor space and low construction investment. If a protective cover is added, it can be placed outdoors.
2. The impeller is directly installed on the extended shaft of the motor, with short axial size, compact structure, reasonable bearing configuration of the pump and the motor, which can effectively balance the radial and axial loads generated by the pump operation, thereby ensuring the smooth operation of the pump. Low vibration and low noise.
3. The shaft seal adopts mechanical seal or mechanical seal combination, imported titanium alloy sealing ring, medium-sized high temperature resistant mechanical seal and hard alloy material, wear-resistant seal, which can effectively extend the service life of mechanical seal.
4, easy installation and maintenance, no need to disassemble the pipeline system, as long as the pump union seat nut can be pulled out all the rotor parts.
5. The series and parallel operation mode of the pump can be adopted according to the requirements of the use, that is, the flow and head.
6. The vertical and horizontal installation of the pump can be used according to the requirements of the pipeline layout.
Use
ISG type vertical hot water pipeline pump is suitable for metallurgy, chemical industry, textile, wood processing, papermaking and restaurants, bathrooms, hotels and other boilers high temperature hot water pressurized circulation transmission and urban housing heating circulation pump, the use of temperature below 80 ℃.
Model Description
Example: ISG50-160(I)A(B)
50-diameter of pump inlet and outlet is 50mm
160-nominal outer diameter of impeller is 160mm
I-Flow Classification
A- impeller outer diameter cutting code
B- Impeller through the second cut
ISG-Single Stage Single Suction Pipeline Centrifugal Pump
Example: ISGD50-160(I)A(B)
50-diameter of pump inlet and outlet is 50mm
160-nominal outer diameter of impeller is 160mm
I-Flow Classification
A- impeller outer diameter cutting code
B- Impeller through the second cut
ISGD-Low Speed Vertical Pipeline Centrifugal Pump
: next page
Hunan Sanchang Pump Co., Ltd.
| Email: | info@sanchangpump.net |
| Hotline: | +86 181 4266 2779 |
| +86 193 1300 1794 | |
| Mobile/Wechat/WhatsApp: | +86 181 4266 2779 |
| Address: | No.517,Xiangfu Road, Yuhua |
| District, Changsha City | |
| Hunan Province, P.R.C |
