PRODUCTS CENTER
Papua New Guinea DFP Stainless Steel Self-balancing Multistage Centrifugal Pump
Head range: 50~2000m
Conveying temperature: 0 ℃ ~ 80 ℃
Inlet pressure: allowable inlet pressure 0.6MPa
Sealing form: packing seal, mechanical seal
Water pump material: HT200, HT250, QT600, ZG, 304, 316, 316L, 317L, 904L, CD4-MCu, etc
Product Description
Product Description
The equipment is used for water injection in the brine well of the brine extraction system. The flow medium of the brine extraction pump is salt-making wastewater, which contains a certain amount of salt (NaCl, Na2SO4, CaSO4). The temperature of the medium is generally normal temperature and does not exceed 50°C.
Product overview
DFP type self-balancing salt mining brine pump has good corrosion resistance and is suitable for conveying corrosive media. Self-balancing stainless steel multi-stage pump is developed and manufactured according to API610 standard and is in a leading position in technology in the industry. It has the advantages of wide high efficiency area, wide performance range, good cavitation performance, safe and stable operation, low noise, few wearing parts, and convenient installation and maintenance.
Structure Description
DFP type self-balancing salt mine halogen pump has no balancing device, I .e. no disc friction loss of balancing disc and no backflow loss of balancing water, so the pump efficiency is 5 ~ 14% higher than that of multi-stage pumps of the same category, and the shaft power of the pump is reduced without friction of balancing disc, thus achieving an energy-saving effect, so the power consumption of the pump during operation is about 3% higher than that of multi-stage pumps of the same category. At the same time, it completely solves various faults such as the wear of the balance disc and the balance ring or the rotor seizure caused by the failure of the balance device. Its design extends the service life of the pump. The trouble-free running time is more than 3 times that of ordinary pumps, and the maintenance cost of users is greatly reduced, thereby reducing the life cycle cost of the pump.
Use
No solid particles, the temperature of -20~105 ℃ corrosive liquid.
Pump model description
DF（P）46 - 50 X 8
DF(P)-horizontal self-balancing single suction stainless steel multistage centrifugal pump
46-The design point flow of the pump is 46m ³/h
50-The head of the design point of the pump is 50m.
8-The number of stages of the pump is 8
: next page
Hunan Sanchang Pump Co., Ltd.
| Email: | sales@sanchangpump.com |
| Hotline: | +86 133 0748 1676 |
| +86 193 1300 1794 | |
| Mobile/wechat: | +86 133 0748 1676 |
| +86 193 1300 1794 | |
| Address: | No.517,Xiangfu Road, Yuhua |
| District, Changsha City | |
| Hunan Province, P.R.C |
