PRODUCTS CENTER
Netherlands IS horizontal single-stage single-suction centrifugal pump
Head range: H = 5~125m
Conveying temperature:-20-150 ℃
Inlet pressure: 0-7.5MPa
Sealing form: packing seal, mechanical seal
Water pump material: HT200, HT250, QT600, ZG, 304, 316, 316L, 317L, 904L, CD4-MCu, etc
Category:
Product Description
It is used to transport clear water or liquid with physical and chemical properties similar to clear water, and the medium temperature is less than or equal to 80 ℃.
Structural features
Horizontal installation, horizontal axial suction, vertical upward direction of discharge outlet,(IY pump discharge outlet can be divided into right, left and upward direction from the suction end). Rotor parts can be drawn out for maintenance without dismantling the inlet and outlet pipelines during maintenance. Depending on the purpose of the shaft seal, packing seal can be used or mechanical seal is not required. Depending on the purpose, various pump materials are divided into ordinary cast iron, wear-resistant cast iron, cast steel, cast steel, cast stainless steel, etc, the pump cover is fixed on the middle bracket through the stop, and then the pump cover is clamped in the middle through the connection between the pump body and the stop of the middle bracket. The pump body is axial suction, radial discharge, foot support type, can be directly fixed on the base. The suspension part is fixed on the middle bracket through the stop, and is supported on the base by the suspension bracket. During maintenance, the inlet and outlet connection pipes, pump body and motor can be removed, and the rotor components can be removed for maintenance only by removing the intermediate connection of the extension coupling.
Main parts
The main parts are pump body, impeller, sealing ring, impeller nut, pump cover, sealing parts, intermediate bracket, shaft and suspension, etc.
Rotation direction
Through the elastic coupling and motor connection, from the drive end, the pump is clockwise rotation.
Model Description
For example: IS80-65J-125A
IS-Clear water pump
80-80mm diameter at pump inlet
65-Pump outlet diameter 65mm
J-slow down use
125-Nominal diameter of impeller
A- Impeller first cut
Hunan Sanchang Pump Co., Ltd.
| Email: | info@sanchangpump.net |
| Hotline: | +86 181 4266 2779 |
| +86 193 1300 1794 | |
| Mobile/Wechat/WhatsApp: | +86 181 4266 2779 |
| Address: | No.517,Xiangfu Road, Yuhua |
| District, Changsha City | |
| Hunan Province, P.R.C |
