PRODUCTS CENTER
India FSB type fluoroplastic corrosion resistant pump
Head: 15~55m
Speed: 2900r/min
Power: 1.5 ~ 18.5KW
Inlet diameter: 25~100mm
Applicable temperature:-20 ℃ ~ 120 ℃
Inlet pressure: ≤ 0.3 MPa (above 0.3 MPa, please declare)
Sealing form: mechanical seal
Water pump material: fluorine plastic
Category:
Product Description
Product Description
FSB type fluoroplastic corrosion-resistant pump is designed according to international standards. The pump body is lined with polyethylene glycol propylene (F46) in a metal shell. The pump cover, impeller and shaft sleeve are all covered with metal inserts and molded by integral sintering and pressing of fluoroplastic. The shaft seal is sealed with external bellows. The static ring is made of 99% alumina ceramic or silicon nitride. The moving ring is made of PTFE filling material, which is corrosion-resistant and wear resistant, it is suitable for transporting any concentration of sulfuric acid, hydrochloric acid, acetic acid, hydrofluoric acid, nitric acid, aqua regia, strong alkali, strong oxidant, organic solvent, reducing agent and other harsh conditions of strong corrosive medium. It is one of the strong corrosion resistant equipment in the world.
Overview
This series of pumps is a single-stage single-suction cantilever centrifugal pump, its structural features are: the flow components are made of fluorine plastic, the pump parts of the lining material with polyfluoroethylene propylene (F46) or polyvinylidene fluoride (F2) and other varieties, can be selected according to the needs of users.
This variety of pump is mainly suitable for conveying acid-base or solvent Lou clear medium. The use of special sealing, but also can transport a small amount of solid corrosive media. This series of pumps adopt WB2, 152, 169 and other forms of mechanical seal. The use temperature range is -20~100 ℃.
Structure Description
FSB-type fluoroplastic corrosion-resistant pump consists of pump body, impeller, cover, seal, bracket, pump shaft, side shaft, hanging bolt, nut and bottom plate.
1. Pump body: steel flange rings are embedded in the connecting parts on the left and right sides, each made of molded plastic synthetic gold.
2. A stainless steel (1 Cr18Ni9Ti) molded plastic alloy is buried in the right side of the cover.
3. Impeller: The connection method of connecting the shaft is adopted. The metal shaft is made of high-quality steel and covered with plastic synthetic gold after finishing. The impeller and the metal connecting shaft are firmly integrated to ensure that the shaft root and the rear part of the impeller bear the torque force when rotating, so that the wet part of the medium is plastic alloy.
4, mechanical seal: the use of WB2 type, ST type without cooling water adjustable end seal technology, made of silicon carbide, high purity alumina ceramic, filled with PTFE, graphite and other materials.
Use
It is suitable for conveying liquids in chemical, petroleum, pharmaceutical, pesticide, dye, paint, smelting, papermaking, electroplating, food, metallurgy, electroplating, food, pickling and other industries. It is an ideal equipment for building civilized factories to prevent running, emitting and leaking.
1. Acid-resistant type: suitable for conveying all kinds of strong acid or acid and solvent mixture.
2. Alkali-resistant type: suitable for conveying alkaline clear liquid or alkaline liquid mixed with solvent.
3. Impurity-resistant type: suitable for acidic or alkaline liquid containing a small amount of solid material in the conveying medium. If the solid content is large, the CUHB-ZK series corrosion-resistant slurry pump can be used, or the selection can be negotiated with the factory.
4. Explosion-proof type: suitable for conveying flammable and explosive liquids and equipped with explosion-proof motors.
5. Type selection condition table: When it is difficult to select a model, please fill in the type selection condition table and fax or mail it to our company to assist in type selection.
Model Description
Example: 50FSB(L)-25
50 -- Pump inlet diameter is 50mm
FSB-Overcurrent components are made of fluoroplastic
L-straight-link structure (no L is bracket structure)
25 -- lift is 25m
Hunan Sanchang Pump Co., Ltd.
| Email: | info@sanchangpump.net |
| Hotline: | +86 181 4266 2779 |
| +86 193 1300 1794 | |
| Mobile/Wechat/WhatsApp: | +86 181 4266 2779 |
| Address: | No.517,Xiangfu Road, Yuhua |
| District, Changsha City | |
| Hunan Province, P.R.C |
