PRODUCTS CENTER
Georgia IH horizontal single-stage chemical centrifugal pump
Head range: 5~125m
Conveying temperature:-20-150 ℃ (please declare above 80 ℃)
Inlet pressure: 0-7.5MPa (above 0.4 MPa, please declare)
Sealing form: packing seal, mechanical seal
Water pump material: HT200, HT250, QT600, ZG, 304, 316, 316L, 317L, 904L, CD
Category:
Product Description
IH-type single-stage single-suction cantilever chemical centrifugal pump is to replace the F-type corrosion-resistant centrifugal water pump energy-saving, replacement products, the product is widely used in chemical, petroleum, metallurgy, paper, food, pharmaceutical, synthetic fiber and other industrial sectors, used to transport corrosive or do not allow pollution viscosity similar to water liquid. The inlet pressure of the pump shall not exceed 0.3MPa.
The temperature of the conveying medium is generally -20 ℃ ~ 105 ℃, and appropriate cooling measures can be taken when necessary to convey higher temperature liquids.
Structure Description
The main parts are pump body, impeller, sealing ring, impeller nut, pump cover, sealing parts, intermediate bracket, shaft and suspension, etc.
Structural features
The pump cover is fixed on the middle bracket through the stop, and then the pump cover is clamped in the middle through the connection between the pump body and the stop of the middle bracket. The pump body is axial suction, radial discharge, foot support type, can be directly fixed on the base. The suspension part is fixed on the middle bracket through the stop, and is supported on the base by the suspension bracket. During maintenance, the inlet and outlet connection pipes, pump body and motor can be removed, and the rotor components can be removed for maintenance only by removing the intermediate connection of the extension coupling.
The shaft seal has 9 forms of packing and mechanical seal, which can be selected according to the nature of the conveying medium and the requirements of the production process.
The pump is connected to the motor through an extended coupling, and the pump rotates clockwise when viewed from the drive end.
Model Description
Example: IH80-65-160A-304
IH-International Standard Chemical Pumps
80-80mm diameter of pump suction
65-Pump outlet diameter 65mm
160-Impeller nominal diameter 160mm
A- impeller outer diameter cutting code (A and B respectively represent the first and second cutting)
304-Material code of pump contact parts: ZG0Cr18Ni9
Hunan Sanchang Pump Co., Ltd.
| Email: | info@sanchangpump.net |
| Hotline: | +86 181 4266 2779 |
| +86 193 1300 1794 | |
| Mobile/Wechat/WhatsApp: | +86 181 4266 2779 |
| Address: | No.517,Xiangfu Road, Yuhua |
| District, Changsha City | |
| Hunan Province, P.R.C |
